Dry-pressed and wet-pressed trays

There are dry-pressed paper trays and wet-pressed paper trays. There are big differences between the two types of paper trays in terms of application and quality. So today, let's take a look at these two types of paper trays.

Wet Press Tray

Raw materials: using log (paper) pulp, sugarcane pulp, existing white, off-white, off-white, black and other colors, all of which are environmentally friendly materials, and the hygienic index can reach the food level.

Quality: The surface of the product is bright and delicate, establishing a brand, improving the grade of the product, and increasing the added value of the product.

Technology: Using hot pressing primary forming technology, high production efficiency and timely delivery.

Environment: It can be designed as a fully enclosed air-conditioning production workshop according to food-grade standards, which is clean and tidy, environmentally friendly and easy to degrade naturally.

Product appearance: smooth and flat surface, no fluff, no powder, the paper plate is formed by the upper and lower molds, and the inside and outside can be as smooth as possible, and there is a mesh screen on the back (there is a layer of stainless steel mesh between the paper plate and the mold, which is used for water filtration. , leaving screen printing, which is an important feature of wet pressed paper trays).

Product accuracy: Due to the particularity of the equipment, the mold is processed by the CNC center, the rounded corners can reach R2, the precision is extremely high, it can be made into a right-angle, horizontally cut paper holder, which can perfectly match all angles of the product, protecting the product like a piece of underwear .

Not easy to deform: Through the mold drying process of the equipment, the finished paper holder only contains 1% water, so it will not be deformed due to moisture weathering when stored in nature.

Scope of application: Paper trays are suitable for some high-end, lightweight, delicate and high-value electronic products. Such as mobile phones, tablet computers, cosmetics, small medical devices, etc., it can cover almost the entire industry. It can also be used directly for outer packaging.

Dry-pressed paper tray: In short, after the initial molding, it is dried or dried, and then hot-pressed to complete the type; it is produced with newsprint, carton edges, etc. as raw materials, which is referred to as yellow pulp in the industry; the strength of the vertical body The structure has good protection for the product; warehousing, can be stacked and stored, which can reduce 1/2 of the storage space; the cost unit price is lower than the foam plastic; the outer packaging volume of the product is slightly smaller, and the container product can reduce the logistics cost; mainly used in industrial Cushioning and other uses.